알루미늄 프로파일의 생산 공정
1. Melting casting is the first process of aluminum profile production
(1) Ingredients: According to the specific alloy grade to be produced, calculate the addition amount of various alloy components and reasonably match various raw materials.
(2) Smelting: The prepared raw materials are added to the melting furnace according to the process requirements to melt, and the slag and gas in the melt are effectively removed by means of degassing and slag refining.
(3) 주조 : 특정 주조 공정 조건에서, 용융 된 알루미늄은 냉각되고 깊은 - 웰 주조 시스템을 통해 다양한 사양의 둥근 주조 막대로 주조된다.
2. 압출 : 압출은 프로파일 형성의 수단입니다. 몰드는 먼저 프로파일 제품의 섹션에 따라 설계되고 제조되며, 가열 된 라운드 캐스팅로드는 산업용 알루미늄 프로파일 압출기를 사용하여 몰드로부터 압출된다. 일반적으로 사용되는 6063 합금은 열처리 중 공기 - 냉각 en 칭 공정 및 후속 인공 시효 공정을 사용하여 열처리 강화를 완료합니다. 상이한 등급의 열처리 가능한 강화 합금은 상이한 열처리 시스템을 갖는다.
3. Coloring (the oxidation process is mainly explained here)
산화 : 압출 알루미늄 합금 프로파일의 표면 내식성은 강하지 않습니다. 표면 처리는 내식성, 내마모성 및 알루미늄의 외관을 높이기 위해 양극 처리하여 수행해야합니다.
(1) Surface pretreatment: The surface of the profile is cleaned by chemical or physical methods, and the pure matrix is exposed to help obtain a complete and dense artificial oxide film. Mirror or matte (matte) surfaces can also be obtained by mechanical means.
(2) 아노다이징 : 특정 공정 조건에서 사전 - 처리 된 프로파일의 표면이 아노다이징되어 조밀하고 다공성이며 강한 AL203 필름이 생성됩니다.
(3) 밀봉 : 양극 산화 후 형성된 다공성 산화막의 기공이 폐쇄되어 산화막의 오염 방지, 내식성 및 내마모성이 향상된다. 산화막은 무색 투명하다. 밀봉하기 전에 산화막의 강한 흡착을 사용하여 일부 금속염이 막 구멍에 흡착 및 증착되어 프로파일의 외관이 검은 색, 청동 색, 금 황색과 스테인리스.
